Used KOMATSU PC950LC-11M0
Parameters
| Engine Model | SAA6D170E-6 |
| Rated Power(kW) | 327.3 |
| Engine Revolutions(rpm) | 1800 |
| Maximum Torque(N·m) | 2650 |
| Inject Type | Electronic Injection |
| Fuel consumption(L/h) | 30-40 |
| Engine Displacement(L) | 18.9 |
| Emisson | Stage IV |
| Track width(mm) | 1300 |
| Fuel Tank(L) | 1200 |
| Hydraulic Tank(L) | 320 |
| Travel Speed(km/h) | 4.6 |
| Bucket Capacity(m³) | 8 |
| Bucket Digging Force(kN) | 502 |
| Boom Length(mm) | 7600 |
| Stick Length(mm) | 3800 |
| Maximum Excavation Radius(mm) | 12503 |
| Maximum Digging Height(mm) | 11824 |
| Maximum Digging Depth(mm) | 7222 |
| Specifications(mm) | 14250 × 4620 × 4580 |
| Operating Weight(kg&ton) | 102150 |
| Size Class | Large |
| Power Type | Diesel |
| Walking Mode | Crawler |
| Country of Origin | Japan |
| Year of Production | 2020 |
| Condition | Used |
| Inventory Quantity | 3 |
| Working Hours(h) | 2000/5000/7000 |
| Price($) | Check the latest price. |
Features
Equipped with Komatsu SAA6D170 six-cylinder China IV high-power engine, 405kW rated power & 2650N·m peak low-speed torque, sustaining full power under continuous heavy load in high-temperature & high-altitude super-large open-pit coal & metal mines. Long aftertreatment regeneration interval reduces long-term mining maintenance cost.
98.43~102.15-ton full top-level ultra-reinforced mining undercarriage with thickened rollers, ultra-wide 4-bar mining tracks and 19.6-ton super heavy counterweight delivers extreme anti-tipping stability during big hard rock mining, extending track service life by 45%.
Standard 7.6m boom + 3.8m mining arm matched with 7.2m³ rock bucket delivers far larger single loading volume than PC700 models. Optional short arm for heavy hammer breaking & long arm for deep dredging covers large quarry stripping, mass earthmoving and river dam projects.
Four large-displacement reinforced heavy-duty hydraulic system with max boost pressure up to 40.0MPa, four oversized heavy swing motors & wear-resistant high-flow main pumps avoid power decay during all-day continuous rock breaking, compatible with 280-class ultra-heavy breakers.
Extra high-strength thick mining steel boom & stick with fully annealed strengthened welds and oversized pins/bushings resist severe impact and abrasion from large rock blocks, drastically cutting unplanned downtime in quarries.
Factory pre-installed 4-circuit ultra-high-flow bi-directional hydraulic lines dedicated for rock hammers support heavy breakers, grapples and rippers without extra pipe refitting, all-in-one solution for super-large open-pit quarry stripping and mass loading.
Professional Komtrax mining telematics system enables real-time monitoring of working hours, fuel consumption, fault alerts and position track via mobile & PC devices for efficient super-large mine fleet operation management.
All ground-level service access points eliminate climbing work for fluid & filter replacement, saving lots of maintenance time on open mining sites.
Photos
